eSIM iPhone setup: how to activate an eSIM on iPhone

How to set up and activate an eSIM on iPhone: supported models, requirements, ways to install, menu paths, deleting an eSIM and moving to a new iPhone.
No Swiss roaming plan? With an eSIM you are online from the moment you arrive.
View eSIMs for SwitzerlandAdvertisement – partner link. If you buy through it we earn a commission at no extra cost to you.
Advertisement
In short: According to Apple, an eSIM works on the iPhone XS, XS Max, XR and all later models if your provider supports eSIM. You need an unlocked iPhone and, during setup, a Wi-Fi network or hotspot. You can install the eSIM with a QR code, with a link or the provider's app, or by entering the details manually. As of: 16 November 2026.
At a glance
| Topic | What Apple says |
|---|---|
| Devices | iPhone XS, XS Max, XR and later |
| Provider | A wireless carrier or worldwide service provider that supports eSIM |
| Connection during setup | Wi-Fi or a hotspot; eSIM-only models can activate without Wi-Fi in some countries |
| Device | Check that the iPhone is unlocked before installing |
| Ways to install | QR code, link (iOS 17.4 or later), provider app, manual entry, activation by the provider |
| Moving to a new iPhone | eSIM Quick Transfer with iOS 18.4 or later on both devices, if the provider supports it |
| Deleting | Settings > Cellular > Delete eSIM (with several plans: choose the plan > Delete Plan) |
Which iPhones support eSIM and what you need
Apple lists the iPhone XS, iPhone XS Max, iPhone XR or a later model as the requirement. You also need a wireless carrier or worldwide service provider that supports eSIM. Apple lists supported providers by country on a separate page. If you are unsure, ask the provider directly.
On how the device is built, Apple writes that an iPhone without a SIM tray supports eSIM only. iPhone 14 models or later bought in the United States can only be activated with an eSIM. For mainland China, Hong Kong and Macao, Apple gives different rules, for example models with two nano-SIM cards. If you buy an iPhone there, read Apple's page for your model.
The requirements in detail:
- Internet connection: You need Wi-Fi or a hotspot for setup. In some countries, eSIM-only models can be activated without Wi-Fi.
- Unlocked device: Apple cannot unlock an iPhone for use with a different carrier. Only your current carrier can, and it can take a few days. To check, open Settings > General > About. If Carrier Lock shows "No SIM Restrictions", the iPhone is unlocked.
- Active plan: The provider has to give you a plan with an eSIM, meaning a QR code, a link, an app or details to enter by hand.
- iOS version: On the help pages read for this guide, Apple names no minimum version for the basic feature. Individual methods do need one: the provider link and touching and holding a QR code in an email or browser need iOS 17.4 or later, and Quick Transfer between iPhones needs iOS 18.4 or later. For problems, Apple recommends the latest iOS version your device supports.
Ways to install an eSIM
Which way you use depends on what your provider offers. Apple describes these options:
- QR code: The provider gives you a code that you scan during iPhone setup or later with the Camera app.
- Provider link: From iOS 17.4, the provider can send a link instead of a QR code, which you tap on the iPhone.
- Provider app: Some providers let you activate the eSIM through their app from the App Store. Some apps can also move your number from the previous phone.
- Manual entry: If the provider gives you the eSIM details as text, you enter them by hand.
- Activation by the provider: If the provider assigned an eSIM to the iPhone at purchase or later, a notification says a cellular plan is ready to be installed.
- Quick Transfer: If your plan moves from another iPhone, it can do so without a new code if the provider supports it (see below).
Setting up step by step
Menu names come from Apple's English help pages and can differ depending on the iOS version. Whichever way you choose, stay connected to Wi-Fi until the eSIM is installed.
QR code while setting up a new iPhone
- Turn on the iPhone and follow the setup.
- On the Set Up Cellular screen, tap Use QR code.
- Follow the onscreen instructions.
QR code after setup
- Open the Camera app and scan the QR code. Tap the Cellular Plan Detected notification.
- If you received the code in an email or in a browser and have iOS 17.4 or later, touch and hold the code and tap Add eSIM.
- Tap Continue at the bottom, then Add Cellular Plan.
- If the iPhone asks for a confirmation code, enter the number your carrier gave you.
Provider link (iOS 17.4 or later)
- Tap the link on the iPhone.
- When the Activate New eSIM notification appears, tap Allow.
- Tap Continue at the bottom.
Provider app
Download the app from the App Store and follow its steps to activate the eSIM.
Manual entry
- Open Settings and tap Cellular or Mobile Data.
- Tap Add Cellular Plan.
- Tap Enter Details Manually at the bottom and type in the details from the provider.
Activation by the provider
- Tap the notification "Carrier Cellular Plan Ready to Be Installed", or open the same entry in Settings.
- Tap Continue at the bottom.
- Make a test call. If it fails, contact the provider.
- If the new plan replaces your physical SIM's plan, remove the physical SIM and restart the iPhone.
Check: Open Settings > Cellular and confirm that the new line appears and is turned on. A phone call is the test Apple describes for provider activation. For a data-only travel eSIM, check instead that mobile data works over the new line.
Naming lines and controlling mobile data
Once there is more than one plan on the iPhone, it pays to organize the lines. Apple gives the following paths on its page about Dual SIM with an eSIM.
- Label a line: Settings > Cellular (or Mobile Data) > tap the number > Cellular Plan Label. Choose a preset such as personal or business, or enter your own name.
- Default number: You choose the default number for calls and messages on the screen shown when the second plan is set up. Apple does not give a separate menu path for it. For individual contacts, open the contact and use Default to pick a number.
- Line for cellular data: Settings > Cellular (or Mobile Data) > Cellular Data > tap the number you want. Apple states that only one number at a time can use cellular data.
- Allow Cellular Data Switching: Under Mobile Data you can turn on Allow Cellular Data Switching. When it is off, cellular data does not work during a call on a line that is not your data line. Apple also notes that switching does not work while Data Roaming is in use.
- Data Roaming per line: Settings > Cellular (or Mobile Data) > make sure Cellular Data is on > tap the line > Cellular Data Options > Data Roaming. Apple describes this as a setting you change for each line separately. When traveling abroad, Apple advises turning Data Roaming off to avoid roaming charges; if you have an international data plan, you may need to keep it on. Check this at your destination.
Deleting an eSIM and moving to a new iPhone
Delete an eSIM: Open Settings > Cellular. With a single plan, tap Delete eSIM. With several plans, tap the plan you want to remove, then Delete Plan. Apple advises erasing an eSIM if you transferred the plan to another device or if you sell, trade in or give away the iPhone. When you erase all content and settings, you can choose whether to erase or keep the eSIM.
Good to know:
- Deleting does not cancel the plan. To cancel, contact your provider.
- After deleting, you need a new eSIM from the provider.
- Do not delete an eSIM as a troubleshooting step unless the provider tells you to.
Move to a new iPhone: If your provider supports eSIM Quick Transfer, you do not need a new code. Apple's requirements: both devices are signed in with the same Apple Account, the old iPhone is unlocked with its passcode, the devices are next to each other with Bluetooth on, and both run iOS 18.4 or later.
- During setup of the new iPhone, follow the transfer prompts. Afterwards, open Settings > Cellular and tap Set Up Cellular or Add eSIM.
- Choose the plan to transfer from the other iPhone. If no list appears, tap Transfer From Nearby iPhone.
- On the old iPhone, confirm the transfer and, if asked, enter the verification code shown on the new iPhone.
- Wait until the plan is active. This deactivates the previous SIM.
- If a banner says the carrier plan still needs to be finished, tap it. You are sent to the provider's web page.
With iOS 26 or later, Apple says you can transfer more than one number. If the provider supports it, a physical SIM can also be converted to an eSIM on the same iPhone. If you come from an Android phone, you need an iPhone 11 or later on iOS 26 or later, an Android device on Android 16 or later, a supported provider, and Wi-Fi and Bluetooth on both devices; otherwise contact the provider. Whether a particular prepaid or travel plan can be transferred is up to the provider.
eSIM for Switzerland: no SIM swap, set up via QR code or app, can be installed at home before you travel.
View eSIMs for SwitzerlandAdvertisement – partner link. If you buy through it we earn a commission at no extra cost to you.
Common stumbling blocks
- QR code and reinstalling: The Apple pages read for this guide do not say whether a QR code can be used a second time. What is documented: if you erase an eSIM, you must ask the provider for a new one. Before deleting or reinstalling, ask the provider whether the code is still valid.
- No Wi-Fi: Without Wi-Fi or a hotspot, setup usually fails. Plan the installation where you have a stable connection, ideally before you leave.
- Carrier lock: If the iPhone is tied to a carrier, only that carrier can unlock it. Check the lock before you buy an eSIM.
- Confirmation code: If the iPhone asks for a code, it is the number the provider gave you, not the QR code itself.
- Two plans at once: Apple sets its own conditions for using several plans, such as an unlocked device or two plans from the same carrier; the details do not belong in this guide.
- It still does not work: Apple has a dedicated help page. Have the error message, your number and the IMEI or EID (Settings > General > About) ready when you contact the provider.
Traveling to Switzerland
Switzerland is not part of the EU roaming zone. For "Roam Like at Home", the European Commission names the 27 EU countries plus Iceland, Liechtenstein, Norway, Ukraine and Moldova; Switzerland is not on that list. Whether your home plan works there and what it costs is something to clear with your provider before the trip. The Swiss regulator BAKOM also describes that a phone near the border can connect to a foreign network, and advises switching off the roaming function in the settings to prevent that.
Transparency
This page contains partner links to an eSIM provider. If you buy through these links, a commission may be paid; there is no extra cost for readers. The information in this guide is based on the sources named and is not a ranking of providers.
FAQ
Which iPhones support eSIM?
Apple names the iPhone XS, XS Max, XR and all later models. You also need a provider that supports eSIM. For mainland China, Hong Kong and Macao, Apple gives different rules.
How do I activate an eSIM on iPhone?
The provider gives you a QR code, a link, an app or manual details. For a QR code, scan it with the Camera app, tap Cellular Plan Detected, then Continue and Add Cellular Plan.
Do I need Wi-Fi to set up an eSIM?
Yes, Apple names Wi-Fi or a hotspot for setup. In some countries, eSIM-only models can be activated without Wi-Fi.
Where do I scan the eSIM QR code?
During setup of a new iPhone, choose Use QR code. Afterwards, scan the code with the Camera app. From iOS 17.4, you can touch and hold a code in an email or browser and tap Add eSIM.
How do I check whether my iPhone is unlocked?
Open Settings > General > About. If Carrier Lock shows "No SIM Restrictions", the iPhone is unlocked. Only your carrier can unlock it.
How do I delete an eSIM from my iPhone?
Open Settings > Cellular. With one plan, tap Delete eSIM; with several, choose the plan and tap Delete Plan. Afterwards you need a new eSIM from the provider.
How do I move my eSIM to a new iPhone?
If your provider supports Quick Transfer, no new code is needed. Both devices need the same Apple Account, Bluetooth and iOS 18.4 or later, and the old iPhone must be unlocked. The previous SIM is then deactivated.
How do I choose which line uses mobile data?
Open Settings > Cellular (or Mobile Data) > Cellular Data and tap the number you want. Apple states that only one number at a time can use cellular data.
Does EU roaming apply in Switzerland?
No. The European Commission names the 27 EU countries plus Iceland, Liechtenstein, Norway, Ukraine and Moldova, not Switzerland. Check your home plan with your provider.
Sources
As of: 16 November 2026. Menu names and features follow Apple's help pages (published between January and October 2026); they can differ depending on the iOS version.
- Apple: Set up eSIM on iPhone (22 October 2026)
- Apple: Using Dual SIM with an eSIM (22 October 2026)
- Apple: About cellular data roaming options (22 October 2026)
- Apple: How to erase an eSIM (17 September 2026)
- Apple: If you can't set up an eSIM on your iPhone (23 April 2026)
- Apple: How to unlock your iPhone for use with a different carrier (22 January 2026)
- Apple: Remove or switch the SIM card in your iPhone (10 March 2026)
- Apple: Use eSIM while traveling internationally with your iPhone (22 October 2026)
- Apple: Transfer your eSIM from Android to iPhone
- European Commission: Roaming
- BAKOM: Roaming (German page published 16 January 2025)
Advertisement
Ready to go? Get an eSIM for Switzerland before you leave.
View eSIMs for SwitzerlandAdvertisement – partner link. If you buy through it we earn a commission at no extra cost to you.